design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ tk C eee-55 C a0.2 w ( ) reference size l 0 d0.5 h b0.2 (i) k (p) (i) + C 0.3 max. pressure relief ( 0 10 and larger) 5 , " capacitance (f) rated voltage mark series identi?cation lot number negative polarity marking (C) mark for lead-free products black dot (square) features endurance : 125 c 3000 h low esr at C40 c (50 % lower than tg series) added esr speci? cation after the endurance test vibration-proof product is available upon request. aec-q200 quali? ed ? rohs directive compliant surface mount type series: tk type: v specifi cations category temp. range C40 c to +125 c rated w.v. range 10 v.dc to 35 v.dc nominal cap. range 47 f to 470 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.01 cv after 2 minutes tan d please see the attached standard products list characteristics at low temperature w.v. (v) 10 16 25 35 (impedance ratio at 120 hz) z(C25 c)/z(+20 c)3222 z(C40 c)/z(+20 c)4333 endurance after the life test with dc rated woking voltage at +125 c 2 c for 3000 hours, the capacitors shall meet the limits speci? ed below. capacitance change 30 % of initially measured values (code u : 35 %) tan d < 300 % of initially speci? ed values (code u : 350 %) dc leakage current < initially speci? ed values shelf life after storage for 1000 hours at +125 c2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci? ed in endurance. (with voltage treatment) esr after the life test after the life test with dc rated working voltage at +125 c2 c for 3000 hours, esr value shall meet the speci? ed below. after 1000 hours 20 c < 150 % of the initially measured speci? ed value. C40 c < 200 % of the initially measured speci? ed value. after 2000 hours 20 c < 300 % of the initially measured speci? ed value. C40 c < 400 % of the initially measured speci? ed value. after 3000 hours 20 c < 1000 % of the initially measured speci? ed value. C40 c < 1500 % of the initially measured speci? ed value. di men sions in mm (not to scale) marking example:10 v 220 f (polarized) marking color: black size code d l a, b h i w p k f 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2 g 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2 frequency (hz) 120 1 k 10 k 100 k to correction factor 0.65 0.85 0.95 1.00 frequency correction factor for ripple current (unit : mm) a 10 v c 16 v e 25 v v 35 v rated voltage mark ? this product qualify for aec-q200, but it has some deviations. 03 mar. 2014
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ tk C eee-56 C standard prod ucts w.v. cap. (20 %) case size speci? cation part no. (rohs:compliant) re? ow min. packaging q'ty dia. length ? size code ripple current (10 0 khz) (+125 c) esr (10 0 khz) tan d (120 hz) (+20 c) taping ( ) (v) (f) (mm) (mm) (ma r.m.s.) +20 oc -40 oc (pcs) 10 220 8 10.2 f 197 0.3 5 0.30 eeetk1a221p (8) 500 330 8 10.2 (f) 197 0.3 5 0.30 EEETK1A331UP (8) 500 10 10.2 g 270 0.2 3 0.30 eeetk1a331p (8) 500 470 10 10.2 (g) 270 0.2 3 0.30 eeetk1a471up (8) 500 16 100 8 10.2 f 197 0.3 5 0.23 eeetk1c101p (8) 500 220 810.2(f) 1970.3 5 0.23 eeetk1c221up (8) 500 10 10.2 g 270 0.2 3 0.23 eeetk1c221p (8) 500 330 10 10.2 (g) 270 0.2 3 0.23 eeetk1c331up (8) 500 25 100 8 10.2 f 197 0.3 5 0.18 eeetk1e101p (8) 500 220 810.2(f) 1970.3 5 0.18 eeetk1e221up (8) 500 10 10.2 g 270 0.2 3 0.18 eeetk1e221p (8) 500 330 10 10.2 (g) 270 0.2 3 0.18 eeetk1e331up (8) 500 35 47 810.2f 1970.3 5 0.16 eeetk1v470p (8) 500 100 810.2(f) 1970.3 5 0.16 eeetk1v101up (8) 500 10 10.2 g 270 0.2 3 0.16 eeetk1v101p (8) 500 220 10 10.2 (g) 270 0.2 3 0.16 eeetk1v221up (8) 500 ? size code( ) : miniaturization product please refer to the page of re? ow pro? le and the taping dimensions. when requesting vibration-proof product, please put the last v instead to p endurance : 125 c 3000 h 03 mar. 2014
|
